Description
Welds Materials Up To 160mm
This 40v fusion machine is designed specifically for quickly and efficiently connecting all major MDPE and HPPE electro-fusion fittings. This unit uses the extreme heat and pressure produced during welding to make simple, reliable, rigid joints between pipes. The heat required to make the joint comes from flowing a constant electrical current through the embedded heater wires within the sleeve fitting, which is placed around the two pipes. The pressure required to make the joint is obtained via the shrinking of the fitting under welding conditions. The shrinking process does not alter the internal bore of the joint because the ends and the centre of the fitting are deliberately kept cold during the welding process. This ensures a strong, reliable professional joint. Once the joint is completed, the heater wires remain encased in the MDPE so there is no chance of corrosion. The connecting sleeve fitting must be fitted evenly between both pipes and the pipes must have clean cut, straight, burr-free edges to provide the most reliable, long-lasting joint.
Specification
Voltage: 110v
Use: Safety Glasses / Goggles
Use: Safety Gloves
Use: Safety Boots
Status: Ready to Hire
Reviews
Fusion machine
Super quick welder, very happy with the whole process.
Reviewed by D. Gorge
Fusion welder
Kit is boss, leaves a good finish on joints and is efficient
Reviewed by Jimmie
Overall Rating: 5/5
Related Hires
Excl. VAT, Hire Shield & consumables
- DIY & Trade
- Save £10.00
- Best Availability
Write a review for "HPPE ( MDPE ) 40v Fusion Machine"
From 1st April 2022, our suppliers will only fuel machines with white diesel. This is due to new government guidelines.
If you, as the hirer, refuel any equipment while it is in your possession, it must be with WHITE DIESEL.
YOU MUST NOT USE RED DIESEL IN HIRED MACHINES OR EQUIPMENT.
If you return a machine refuelled with rebated diesel, suppliers will have to remove and dispose of the fuel. They must also flush the tank and supply lines before they can refuel them. The process is chargeable, with no exceptions.
Hire Shield is a subrogation waiver covering the first £50 (Standard) or £200 (Premium) of the £1,700 hired-in plant claim excess. It is included in every booking. The charge is calculated at checkout.
If you have your own Hired-In Plant Insurance (HIPI), you'll be asked to provide proof after booking. To opt out of Hire Shield, contact us via .
