Description
Lightweight & Portable Multiweld EF
This HDPE Multiweld is an extremely convenient unit for connecting Valsir, Akatherm, Coes and Wavisolo HDPE electrofusion fittings from 40mm to 160mm in diameter. This 110v unit uses the extreme heat and pressure produced during welding to make simple, reliable, rigid joints between pipes. The heat required to make the joint comes from flowing a constant electrical current through the embedded heater wires within the sleeve fitting, which is placed around the two pipes. The pressure required to make the joint is obtained via the shrinking of the fitting under welding conditions. The shrinking process does not alter the internal bore of the joint because the ends and the centre of the fitting are deliberately kept cold during the welding process. This ensures a strong, reliable professional joint. Once the joint is completed, the heater wires remain encased in the HDPE so there is no chance of corrosion. The connecting sleeve fitting must be fitted evenly between both pipes and the pipes must have clean cut, straight, burr-free edges to provide the most reliable, long-lasting joint.
Specification
| Size | 40 - 160mm. |
| Voltage | 110v. |
| Use Safety Glasses | Use Safety Gloves. |
| Use Safety Boots | Use Power Breaker. |
Reviews
There are no reviews for this product yet.
Related Hires
Excl. VAT, Hire Shield & consumables
- DIY & Trade
- Save £100.00
- Best Availability
Excl. VAT, Hire Shield & consumables
- DIY & Trade
- Save £10.00
- Best Availability
Excl. VAT, Hire Shield & consumables
- DIY & Trade
- Save £10.00
- Best Availability
Write a review for "HDPE Multiweld EF - 32mm to 160mm"
From 1st April 2022, our suppliers will only fuel machines with white diesel. This is due to new government guidelines.
If you, as the hirer, refuel any equipment while it is in your possession, it must be with WHITE DIESEL.
YOU MUST NOT USE RED DIESEL IN HIRED MACHINES OR EQUIPMENT.
If you return a machine refuelled with rebated diesel, suppliers will have to remove and dispose of the fuel. They must also flush the tank and supply lines before they can refuel them. The process is chargeable, with no exceptions.
Hire Shield is a subrogation waiver covering the first £50 (Standard) or £200 (Premium) of the £1,700 hired-in plant claim excess. It is included in every booking. The charge is calculated at checkout.
If you have your own Hired-In Plant Insurance (HIPI), you'll be asked to provide proof after booking. To opt out of Hire Shield, contact us via .
