Description
Removes paint & rust from metal & textured surfaces
This light-weight, easy to use electric needle gun offers a fast and efficient way of removing rust, paint and general wear from metal, concrete and stone. Weighing just 3.5 kg, this compact nail gun is very easy to control, so you can be precise enough to reach the parts that need to be worked on most. Whilst using this tool, make sure that you take all reasonable steps to prevent injury to yourself. Wear protective goggles and a dust mask to avoid getting debris and dust in your eyes or lungs, protective gloves, and ear defenders. We can supply Personal Protection Packs, which give you safety goggles, safety gloves, dust mask and ear plugs. You can add this to your order during checkout. Also ensure that you take regular breaks from using the machine to minimise the risk of developing injuries related to HAVS. Please note, as these units are 110v pieces of equipment, you will need a transformer, a generator or 110V site supply in order to use them. We can supply transformers and extension leads - you can add these to your order during checkout. You can book an electric needle gun hire online or over the phone and then collect from your local store at the start of the hire, or we can deliver to you.
Specification
| Single Impact Energy: | 3.3J |
| Triaxial Vibration for Chiselling in Concrete: | 13.5m/s² |
| Weight according to EPTA Procedure 01/2003: | 3.8kg |
| Contact Force: | 90N |
| Full Hammering Frequency: | 4080 impacts/minute |
| A-Weighted Emission Sound Pressure Level: | 91dB(A) |
| Max. Chiselling Performance: | 350cm³/min |
| Needle Adapter: | TE NA-1 |
| Dimensions (LxWxH): | 379 x 93 x 215mm |
| Weight: | 3kg |
Reviews
Needle Gun
Used this to take 200 years of paint off my granite cottage; a friend borrowed it to do his house! Very good piece of kit. Just make sure you put a large capacity air compressor because it uses a lot of air.
Reviewed by Hugo
Overall Rating: 5/5
Write a review for "Electric Needle Gun"
From 1st April 2022, our suppliers will only fuel machines with white diesel. This is due to new government guidelines.
If you, as the hirer, refuel any equipment while it is in your possession, it must be with WHITE DIESEL.
YOU MUST NOT USE RED DIESEL IN HIRED MACHINES OR EQUIPMENT.
If you return a machine refuelled with rebated diesel, suppliers will have to remove and dispose of the fuel. They must also flush the tank and supply lines before they can refuel them. The process is chargeable, with no exceptions.
Hire Shield is a subrogation waiver covering the first £50 (Standard) or £200 (Premium) of the £1,700 hired-in plant claim excess. It is included in every booking. The charge is calculated at checkout.
If you have your own Hired-In Plant Insurance (HIPI), you'll be asked to provide proof after booking. To opt out of Hire Shield, contact us via .
