110v Cement Mixer

110v cement mixers are designed for safety on site, and they do require a transformer if you want to use one at home, or using a 230v power supply. You can hire 3kVA transformers from us as an optional extra when you book 110v equipment.

Place the mixer on a firm, level surface. Pour approximately one gallon of water into the drum. Make sure that you use the correct amount of water for the cement mix, as outlined in the instructions. Too much water will make the cement mix too thin and unmanageable. Not enough water will make the concrete too thick and it will not combine thoroughly. Next, pour the cement mix into the drum, plug the mixer in and turn it on. Allow the machine to fully mix the contents and ensure that there is no visible powder left. Leave the cement mixer running for as long as you need it to keep the contents moist and manageable. When the contents are fully mixed, turn the machine off and slowly tilt the drum to pour the fresh cement out.

You can clean a cement mixer thoroughly using a stiff brush or a mix of 1 inch (2½cm) gravel and water. This clears the drum out to prevent any residue from hardening inside it.

You can use a range of different concrete and mortar mixes for all different jobs. General purpose concrete is made up of 1 part cement, 2 parts sand, and 3 parts coarse aggregate. This concrete is suitable for most purposes, but not for foundations or paving. Standard mortar is made up of 1 part cement, 5 parts soft sand, with 1 part lime or plasticiser optional. This mortar is used for sheltered bricklaying, rendering, and more. These are just 2 standard mixes, and many more proportions can be used for different applications.

Mammoth Hire has over 400 Click & Collect locations across the UK and delivers tools & equipment to your door. Simply Call 0800 142 2022 or Book Online.